Accessories

Home  >  Accessories & Filters  > Accessories

Next

Filler Breather with Strainer

These filler breather with strainer are used to trap contaminates or a foreign particles enter in to hydraulic system from air and fluid while filling oil into hydraulic tank. This can be directly mounted either on tank top or side of tank.

Features

• Excellent dirt holding capacity due to special filtration media used.
• 40 micron element standard.
• Combination unit for filtering air passing in to the tank and straining oil while filling the tank.
• Synthetic element.

Models

Suction Strainer

These suction strainer are used to trap contaminates from the fluid flowing through it. This can be located on a

suction port of the pump or sub merged in the hydraulic tank and attached to the suction line heading to the pump.

These suction strainers consists of stainless steel wire mesh, glass filled nylon head and end cap.

Features

• Reusable stainless steel wire mesh.
• Excellent filtration efficiency.
• 100 mesh standard (149micron).
• Suitable for petroleum and mineral based oils.

Models

Oil Level Indicator

This oil level indicator is used for non pressurized tanks in hydraulic power packs to indicate oil level inside the tank.

Features

• Poly carbonate body.
• Inbuilt float for clear indication.
• Good Sealing against leakage.
• Suitable for petroleum, mineral based oils.

Models

Temperature Gauge

These temperature gauges are developed for accurate and reliable measurement of temperature in a hydraulic system. YIL temperature gauges are built for highest standard of quality, performance, reliability and durability. These are argon welded joints having an excellent accuracy and good sensitivity against temperature change.

Models

Clogging Indicator

Clogging indicators are warning devices which indicate visually that the filter element is filled with the contaminants and should be changed or cleaned.

Features

Three color Gauge for Easy Reading

• Green Range : OK
• Yellow Range : WARNING
• Red Range : DANGER

Gauge Isolator Valve – (Single – Multi Station)

Gauge Isolator valves, 1GI are meant for applications where a pressure gauge is connected to a pressure line and needs to be isolated when not in use. These can be mounted on a hydraulic manifold or a control panel. These Isolator valves offer following advantages, x Simple machining of the interface /panel x Quick assembly, x Ease of axial orientation of the Pressure gauge face for proper alignment. x Compact and elegant assembly, x Easy readability of the gauge.

Features

Three color Gauge for Easy Reading

• Green Range : OK
• Yellow Range : WARNING
• Red Range : DANGER

Air Bleed Valves

This valve is designed to use when a pump starts to bleed off the air which is enclosed in a suction line or another lines in the system.

Flexible Drive Coupling

The Flexible Drive Coupling consists of two gear hubs engaging in a sleeve of high grade plastic material. has superior strength and a wide operating temperature range. The gears have crowned-tooth form which permit axial and angular misalignment. The couplings have undergone extensive testing under severe load conditions.

Models

Pressure Gauge

These pressure gauges are developed for accurate and reliable measurement of hydraulic pressure and are

constructed from mechanical bourdon tube.

YIL pressure gauges built for highest standard of quality, performance, reliability and durability. These are

filled with glycerin, constructed with stainless steel bezel case which will provide strength and will not discolor or rust.

The bourdon tube is constructed from Phosphor bronze.

Models